PM8006 Stereo 140W Integrated Amplifier

25,952 Points

Enjoy enhanced quality audio with the Marantz PM8006 Stereo 140W Integrated Amplifier. It outputs up to 70W per channel RMS at 8 Ohms and can connect to two pairs of speakers in an A/B configuration, which it can switch between. Its triple-layer bottom plate is designed to reduce unwanted vibration. The amplifier has six stereo RCA inputs, including one reserved for a turntable. It includes a remote control for added convenience.
Amplifier
Amplifier Type Integrated Amplifier (Preamp/Power Amp Combo)
Channels 2.0
Number of Subwoofer Channels
Amplifier Class
Power Output per Channel 70 W at 8 Ohms (RMS)
100 W at 4 Ohms (RMS)
Dynamic Power per Channel
Frequency Response 5 Hz to 100 kHz
THD+N
THD 0.0002%
Residual Output Noise
Channel Separation
Speaker Impedance
Tone Control
Damping Factor 100
DTS Compatibility
Dolby Compatibility
Auro 3D Support
Upmixing Technology
Supported File Formats
Supported Sample Rates
DAC
HDR Compatibility
Pass-Through Support
Upscaling
GUI
Connectivity
Rear A/V Inputs 5 x Stereo RCA
1 x Stereo RCA (Phono MM) with Ground Screw
1 x Stereo RCA Power Amp Direct
Rear A/V Outputs 1 x Stereo RCA
1 x Stereo RCA Pre-Out
Front I/O 1 x 1/4" / 6.35 mm Headphone Output
Headphone Output Power
Other Rear I/O 1 x RCA (Remote) Input
1 x RCA (Remote) Output
Speaker Connectors 4 x Binding Post Pair
HDCP Support
HDMI Compression Modes
Audio Return Channel (ARC)
HDMI CEC
Media Card Slot
A/B Speaker Selection
Bi-Amp Capability
Input Impedance Phono (MM): 47 Kilohms
Line: 20 Kilohms
Power Amp: 15 Kilohms
Input Sensitivity Phono (MM): 2 mV
Line: 200 mV (High)
Power Amp Direct: 1.6 V
Max Input Level
Phono RIAA EQ Deviation
Rated Output / Impedance
Dynamic Range
Signal to Noise Ratio Phono (MM): 87 dB
Line: 106 dB (2 V Input)
Power Amp Direct: 125 dB
Total Harmonic Distortion (THD)
Channel Separation
Crosstalk
Wireless Connectivity
Wi-Fi None
Wireless Security
Bluetooth None
Bluetooth Profiles
Supported Audio Codecs
Bluetooth Range
Wireless Audio Protocols
DLNA Support
External Control Support
Virtual Assistant Support
Tuner Type
Number of Tuner Presets
Radio Frequencies
Sensitivity
Signal to Noise Ratio
Distortion
Power
AC Input Power 120 VAC, 60 Hz
AC Power Output
Power Consumption Active: 220 W
Standby: 0.2 W
Physical
Dimensions (W x H x D) 17.3 x 5.0 x 14.9" / 440.0 x 128.0 x 379.0 mm
Weight 26.5 lb / 12 kg
Warranty Length

Other Items You May Consider
    We're happy to answer any and all questions :   (888) 261-3101   yourpartner@catalogapi.com